Feature
Highly efficient and cost-effective; 8 channels oscilloscope for vehicle testing; 2.4MSa/s real time sampling rate, 12bit vertical resolution; DAQ card function; 8 channels programmable generator which can analog signals of crankshaft, camshaft etc.
1) Oscilloscope
3) Programmable Generator2
3) Others
Model | Hantek1008A |
Oscilloscope Mode | |
Vertical System | |
Analog Channel | 8 |
Input Impedance | Resistance: 1MΩ |
Input Sensitivity | 10mV/div to 5V/div |
Input Coupling | DC |
Resolution | 12 bits |
Horizontal System | |
Memory Depth | 4K |
Max. Input | 400V (DC+AC Peak) |
Real-Time Sampling Rate | 2.4MSa/s |
Time BaseRange | 1ns/div to 20000s/div(1-2-5sequences) |
Time Base Precision | ±50ppm |
Trigger System | |
Time Base Range | 1ns/div to 20000s/div(1-2-5sequences) |
Time Base Precision | ±50ppm |
Trigger Source | CH1, CH2,CH3,CH4, CH5, CH6,CH7,CH8 |
Trigger Mode | Edge |
X-Y Mode | |
X-Axis Input | CH1 |
Y-Axis Input | CH2 |
Cursors and Measurement | |
Voltage Measurement | Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot |
Time Measurement | Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle |
Cursors Measurement | Horizontal ,Vertical, Track, Auto Measure Modes |
Waveform Signal Process | +,- , x,÷, FFT, Invert |
Voltage Range |
10mV to 5V/div @ x 1 probe 100mV to 50V/div @ x 10 probe 10V to 5000V/div @ x 1000 probe 100V to 50000V/div @ x 10000 probe 200mV to 100V/div @ 20:1 |
Current Range |
100mA to50.0A/div @ CC65(20A) 1000mA to500.0A/div @ CC65(65A) 1A to100.0A/div @ CC650(60A) 1A to200.0A/div @CC1100(100A) 10A to2000.0A/div @CC1100(1100A) |
FFT | Rectangular, Hanning, Hamming, Blackman Window |
Math | Addition, subtraction, multiplication, division |
Programmable Generator | |
Channel | 8 |
Output Level | LVTTL |
Frequency Range | 0-250kHz |
Interface | USB 2.0(Full Speed) |
Power | No need extra power supply |
Size & Weight | 185 x 150 x 27 (mm); 0.35kg |
Select | Model | Bandwidth | Channels | Sampling rate | Other |
---|---|---|---|---|---|
Hantek6004EU Series
|
70-250MHz | 4CH | 1GSa/s | Waveform capture rate is 400,000FPS 500uV-10V/DIV input sensitivity 128Mpts memory depth 80,000 section fragmentation |
|
iDSO Series
|
70MHz | 2CH | 250MSa/s | iPad/Windows Oscilloscope, Multi-touch Operation. WIFI Communicati) Build-in Lithium Battery.Floating Measurementon (USB Communication small size convenient for travel |
|
Hantek6004BD Series
|
70MHz~250MHz | 4CH+1CH Arb. Generator | 1GSa/s | USB2.0 Interface, plug and play device Support Win7/Win8/Win10 High cost performance Support USBXI, same interface, easy to operate |
|
Hantek6004BC Series
|
70MHz~250MHz | 4CH | 1GSa/s | USB2.0 Interface, plug and play device Support Win7/Win8/Win10 High cost performance Support USBXI, same interface, easy to operate |
|
PSO2020 USB Pen Storage Oscilloscope
|
20MHz | 1 CH | 96MSa/s | USB Power Supply 20 Types of Auto Measurement Pass/Fail Function Windows NT,Windows2000/XP WIN7/8 Possible to Connect to Laptop Directly |
|
Hantek1008A
|
100K | 8CH | 2.4MSa/s | 70 Kinds of Vehicle Diagnosis; USB 2.0 interface plug and play; 12Bits Vertical Resolution 8 CH Programmable Generator |
|
DSO3000(A) Series (1GSa/s)
|
100~250MHz | 4 CH | 1GSa/s | 128M Memory Depth Max. measurable signal up to 250MHz Similar interface with Bench DSO 8Bit vertical resolution Suppurt Win7/Win8 |
|
DSO3000 Series (200MSa/s)
|
60MHz | 4/2CH+16LA | 200MSa/s | 16M Memory Depth DSO/LA/Spectrum Analysis/ AWG/ Frequency Counter; USB 2.0 interface plug and play; Similar interface with Bench DSO; Suppurt Win7/Win8/XP/VISTA. |
|
Hantek6002BE Series
|
20MHz~200MHz | 2CH | 48MSa/s-250MSa/s | USB2.0 interface, no external power required, Support win7, win8 8Bit Vertical resolution, Standard USBXI (TM) interface Similar interface with Bench DSO easy to operate |
|
Hantek6022BL
|
20MHz | 2CH(Digital) 16CH(Logic) |
48MSa/s | USB2.0 interface, no external power required, 10MHz Logic Analyzer Support Win7, Win8, 8Bit vertical resolution. Support USBXI, Similar interface with Bench DSO |
|
DSO2000 Series
|
40-200MHz | 2CH | 100/150MS/s 200/250MS/s |
USB2.0 interface, no external power required,Support Win7, Win8 8Bit vertical resolution Similar interface with Bench DSO 23 measurement functions PASS/FAIL Check with FFT. |
|
DSO-220USB/DSO-2100USB
|
20MHz-100MHz | 2 | 20MSa/s | The discontinued, don't support compare |
|
|
|
|
|
|
Model | Description | View Manual |
HT300B,HT500B | 350Mhz,500MHz,10:1/1:1 | Download |
HT100B,HT200B | 100MHz,200MHz,10:1/1:1 | Download |
PP-80,PP-150,PP-200 | 60MHz,100MHz,200MHz,10:1/1:1 | Download |
PP80B, PP150B, PP200B, PP300B | 80Mhz, 150MHz, 200MHz, 300MHz, 10:1/1:1 | Download |
PP-90 | 80MHz,10:1/1:1 | Download |
T3100 | 100MHz,100:1,2000VDC Peak AC | Download |
Model | Description | View Manual |
CC65 | AC/DC: 0 – 20KHz,20mA to 65A DC | Download |
CC650 | AC:0 – 5KHz,1A - 500A ,DC:1A - 650A | Download |
CC800 | AC:0 – 5KHz,1A - 500A ,DC:1A - 800A | Download |