Position: Home / News
Hantek Lanuch High Cost-Effective DSO5000P Series
March 10, 2013
1619
0

Hantek Lanuch High Cost-Effective Digital Storage Oscilloscope DSO5000P Series, the specifications as below:

Features

*200/100/70MHz bandwidths

*1GSa/s Real Time sample rate

*Large (7.0-inch) color display,WVGA(800x480)

*Record length up to 40K

*Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.

*USB host and device connectivity, standard.


  

 Specifications


Model

DSO5202P

DSO5102P

DSO5072P

Bandwidth

200MHz

100MHz

70MHz

Real-time Sample Rate

1GSa/s

Equivalent Sample Rate

25GSa/s

Record Length

40K

SEC/DIV Range

4nS/div-40S/div (in a 2, 4, 8 sequence)

Delay Time Accuracy

500ps

Vertical

A/D Converter

8-bit resolution, each channel sampled simultaneously

VOLTS/DIV Range

2mV/div5V/div at input BNC

Position Range

±50V(5V/div),±40V(2V/div500mV/div),

±2V(200mV/div50mV/div),±400mV(20mV/div2mV/div)


Rise Time at BNC

1.7ns

3.5ns

5ns

DC Gain Accuracy

±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
±
3% for Sample or Average acquisition mode, 5V/div to 10mV/div

Trigger System

Trigger Sensitivity
(Edge Trigger Type)

DC:  1div from DC to 10MHz;1.5div from 10MHz to 100MHz; 2div from 100MHz to 200MHz;
EXT:
200mV from DC to 40MHz
EXT/5:1V from DC to 40MHz
AC: Attenuates signals below 10Hz
HF Reject: Attenuates signals above 80kHz
LF Reject: Attenuates signals below 150kHz
Noise Reject: Reduces trigger sensitivity

Trigger Level Range

CH1,CH2: ±8 divisions from center of screen
EXT: ±
1.2V EXT/5: ±6V

Trigger Level Accuracy,
typical (Accuracy is for signals having rise and fall times
20ns)

CH1,CH2: ±(0.3div x V/div) (within ±4 divisions from center of screen)

EXT: ±(6% of setting 40mV)
EXT/5: ±
(6% of setting 200mV)

Holdoff Range

100ns-10s

Trigger Type

Edge

Trigger on the rising or falling edge

Pulse Width

Trigger (when >,<,=,) on positive or negative pulses
Pulse Width Range: 20ns-10s

Video

Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)

Slope

Trigger (when >,<,=,) on a positive or negative slope
Set Time: 20ns
10s

Overtime

from the rising or falling edge
Set Time: 20-10s

Alternate

Internal trigger on edge, pulse width, video or slope

Measurement

Cursors

Manual: The difference between voltage cursors V; the difference between time cursors T; 1/T calculated by Hz.
Tracing: The voltage and time at a waveform point;

Automatic(32)

Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF

Display

Type

Right angle 7"TFT 16-digit color LCD

Resolution

800*480 dots

Contrast

16 gears, with the progress bar to show adjustment

Interface

USB host and USB slave

Power Supply

Voltage

100-120VACRMS(±10%), 45Hz to 440Hz, CAT
120-240VACRMS(±
10%), 45Hz to 66Hz, CAT

Power

<30W

Fuse

2A, T rating, 250V

Mechanical

Size

Length: 313mm Width: 108mm Height: 142mm

Weight

2.08KG (exclusive of packing and accessories)



Accessories











Other Pictures


   
   
   


 

想分享,扫一扫